收藏本站
D E M O 9 S 0 8 S V 1 6 / F L 1 6
J U N E
5 ,
2 0 0 9
U S E R G U I D E
RESET SWITCH
The RESET switch applies an asynchronous RESET to the MCU. The RESET switch is
connected directly to the RESET* input on the MCU. Pressing the RESET switch applies a
low voltage level to the RESET* input. A pull-up bias resistor allows normal MCU operation.
Shunt capacitance ensures an adequate input pulse width.
Both the MC9S08SV16 and MC9S 08FL16 MCU’s apply a multiplexed RESET* input. To use
the RESET switch, the RESET pin must be enabled (SOPT1_RSTPE). Refer to the
MC9S08SV16 or MC9S08FL16 Reference Manual for details on configuring using the RESET*
input.
LOW VOLTAGE RESET
Both the MC9S08SV16 and the MC9S08FL16 apply an internal Low Voltage Detect (LVD)
circuitry. The LVD holds the MCU in reset until applied voltage reaches the appropriate level.
The LVD also protects against under-voltage conditions. Consult the MC9S08SV16 or
MC9S08FL16 Reference Manual for details on LVD operation.
TIMING
Default timing for the DEMO9S08SV16/FL16 is provided by the MC9S08SV16 or
MC9S08FL16 internal timing source which is active out of RESET. External circuitry for an
external 32 kHz XTAL oscillator is provided; however, these components are not populated in
default configuration.
Refer to the MC9S08SV16 or MC9S08FL16 Reference Manual for
details on configuring the timing source.
COMMUNICATIONS
Serial communication on the DEMO9S08SV16/FL16 board is supported through an RS-232
physical layer interface and DB-9 connector and through a virtual serial port implemented in
the USB-BDM. The COM_SEL option header selects between the applied serial function.
NOTE: Virtual serial port services are not functional as of the date of this document
COM Port
An RS-232 transceiver provides RS-232 to TTL/CMOS logic level translation between the
COM connector and the MCU. The COM connector is a 9-pin Dsub, right-angle connector. A
ferrite bead on shield ground provides conducted immunity protection. Communication signals
TXD and RXD are routed from the transceiver to the MCU. These signals are also available
on connector J1. Hardware flow control signals RTS and CTS are available on the logic side
10
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
DEMO9S08JM16 BOARD DEMO FOR JM16 FAMI
DEMO9S08QD4 BOARD DEMO FOR MC9S08QD FAMILY
DEMO9S08QE8 BOARD DEMO FOR MC9S08Q
DEMO9S08SC4 DEMO BOARD FOR 9S08SC4
DEMO9S08SG32 BOARD DEMO FOR SG32/SH32 FAMILY
DEMO9S08SG8 BOARD DEMO FOR MC9S08SG FAM
DEMO9S08SV16 BOARD DEMO FOR SV16 FAMILY
DEMO9S12XHY256 BOARD DEMO FOR 9S12XHY256
相关代理商/技术参数
DEMO9S08JM16 功能描述:开发板和工具包 - S08 / S12 DEMO BOARD FOR JM16 FAMI RoHS:否 产品:Development Kits 工具用于评估:MC9S12G128 核心:S12 接口类型:CAN, LIN, RS-232, USB 工作电源电压:5 V 制造商:Freescale Semiconductor
DEMO9S08JM16 制造商:Freescale Semiconductor 功能描述:; Development Tool Type:Hardwa
DEMO9S08JS16 功能描述:开发板和工具包 - S08 / S12 DEMO BOARD FOR JS16 RoHS:否 产品:Development Kits 工具用于评估:MC9S12G128 核心:S12 接口类型:CAN, LIN, RS-232, USB 工作电源电压:5 V 制造商:Freescale Semiconductor
DEMO9S08LC60 功能描述:开发板和工具包 - S08 / S12 DEMO BOARD FOR 9S08LC60 RoHS:否 产品:Development Kits 工具用于评估:MC9S12G128 核心:S12 接口类型:CAN, LIN, RS-232, USB 工作电源电压:5 V 制造商:Freescale Semiconductor
DEMO9S08LG32 功能描述:开发板和工具包 - S08 / S12 DEMO BOARD FOR LG32 FAMI RoHS:否 产品:Development Kits 工具用于评估:MC9S12G128 核心:S12 接口类型:CAN, LIN, RS-232, USB 工作电源电压:5 V 制造商:Freescale Semiconductor
DEMO9S08LG32 制造商:Freescale Semiconductor 功能描述:MC9S08LG32 Demonstration board
DEMO9S08LIN 功能描述:子卡和OEM板 LIN DAUGHTER BOARD RoHS:否 制造商:BeagleBoard by CircuitCo 产品:BeagleBone LCD4 Boards 用于:BeagleBone - BB-Bone - Open Source Development Kit
DEMO9S08LL16 功能描述:开发板和工具包 - S08 / S12 DEMO BOARD FOR LL16 RoHS:否 产品:Development Kits 工具用于评估:MC9S12G128 核心:S12 接口类型:CAN, LIN, RS-232, USB 工作电源电压:5 V 制造商:Freescale Semiconductor